For those of you who have ordered the VINYL STENCIL $7...
This is the tutorial on how I do it!
1. Paint 12" x 12" board. Let dry completely!
2. Run scraper over vinyl tape to make sure it adheres to vinyl.
3. Turn over and peel off backing SLOWLY.
4. Position on board and rub on with scraper.
5. CAREFULLY peel off transfer tape!
6. Go over lightly with scraper or hand to make sure everything is stuck to board. NEW... I now go over the whole vinyl stencil with the same color as the board... it seals the cutouts and makes it look crisper after you peel off the vinyl!!!!
7. Paint each section... being careful not to overlap.
8. Repeat... until all vinyl cut outs are painted. LET DRY!
9. Peel off vinyl.
10. Pick off any remaining vinyl... use pin or sharp instrument.
11. Lightly sand the entire surface & edges of board.
12. Dip in black stain (diluted black paint w/ water) and BLOT dry with old towel.
MAKE SURE THAT YOU ONLY BLOT OTHERWISE THE WHITE PAINT WILL SMEAR!!!
ENJOY!!!
Thank you so much for stopping by my blog and leaving a comment. This vinyl subway art is just beautiful.
ReplyDelete